Removing The Crankshaft; Working On Individual Parts; Working On The Right Section Of The Engine Case - Husqvarna FS 450 2016 Repair Manual

17 ENGINE
17.3.35
17.4
17.4.1
186

Removing the crankshaft

Working on individual �arts

Working on the right section of the engine case

-
Position the engine upright.
Remove lock ring@.
-
Pull both transmission shafts out of the bearing seats
together.
Info
Make sure not to misplace the washers.
O.
-
Remove crankshaft
• Info
I
Ensure that washer
-
Take off the right section of the engine case.
Preparatory work
-
Remove the oil pressure regulator valve.
8
is not damaged.
(a p. 189)
..