Important Points To Remember - Dell C9000 Series Networking Configuration Manual

Table 4. Forming a copy Command
Location
For a remote file location:
NFS File System

Important Points to Remember

• You cannot copy a file from one remote system to another.
• You cannot copy a file from one location to the same location.
• When copying to a server, you can only use a hostname if a domain name server (DNS) server is
configured.
• The usbflash command is supported on the device. Refer to your system's Release Notes for a list of
approved USB vendors.
Example of Copying a File to current File System
Dell#copy tftp://10.16.127.35/username/dv-maa-C9010-test nfsmount://
Destination file name [dv-maa-sC9010-test]:
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!.!
44250499 bytes successfully copied
Dell#
Dell#copy ftp://10.16.127.35 nfsmount:
Source file name []: test.c
User name to login remote host: username
Example of Logging in to Copy from NFS Mount
Dell#copy nfsmount://test flash:
Destination file name [test]: test2
!
5592 bytes successfully copied
Dell#
Dell#copy nfsmount://test.txt ftp://10.16.127.35
Destination file name [test.txt]:
User name to login remote host: username
Password to login remote host:
!
Example of Copying to NFS Mount
Dell#copy flash://test.txt nfsmount://
Destination file name [test.txt]:
!
15 bytes successfully copied
Dell#copy flash://ashu/capture.txt.pcap nfsmount://
Destination file name [test.txt]:
!
15 bytes successfully copied
Dell#copy flash://ashu/capture.txt.pcap nfsmount://username/snoop.pcap
!
24 bytes successfully copied
Dell#
Dell#copy tftp://10.16.127.35/username/dv-maa-C9010-test ?
flash:
nfsmount:
source-file-url Syntax
copy nfsmount://{<mount-
point>}/filepath/filename}
username:password
Copy to local file system ([flash://]filepath)
Copy to nfs mount file system (nfsmount://filepath)
destination-file-url Syntax
tftp://{hostip |
hostname}/filepath/
filename
Getting Started 54