Setting Data; 1Channel­specific Setting Data; 2Axis/Spindle-Specific Setting Data - Siemens SINUMERIK 828D Function Manual

S1: Spindles
16.11 Data lists
Number Identifier: $MA_
35410 SPIND_OSCILL_ACCEL
35430 SPIND_OSCILL_START_DIR
35440 SPIND_OSCILL_TIME_CW
35450 SPIND_OSCILL_TIME_CCW
35500 SPIND_ON_SPEED_AT_IPO_START
35510 SPIND_STOPPED_AT_IPO_START
35550 DRILL_VELO_LIMIT[n]
35590 PARAMSET_CHANGE_ENABLE
36060 STANDSTILL_VELO_TOL
36200 AX_VELO_LIMIT
16.11.2

Setting data

16.11.2.1 Channel­specific setting data
Number Identifier: $SC_
42600 JOG_FEED_PER_REF_SOURCE
42800 SPIND_ASSIGN_TAB
42900 MIRROR_TOOL_LENGTH
42910 MIRROR_TOOL_WEAR
42920 WEAR_SIGN_CUTPOS
42930 WEAR_SIGN
42940 TOOL_LENGTH_CONST
16.11.2.2 Axis/spindle-specific setting data
Number Identifier: $SA_
43200 SPIND_S
43202 SPIND_CONSTCUT_S
43206 SPIND_SPEED_TYPE
43210 SPIND_MIN_VELO_G25
43220 SPIND_MAX_VELO_G26
43230 SPIND_MAX_VELO_LIMS
43235 SPIND_USER_VELO_LIMIT
43240 M19_SPOS
43250 M19_SPOSMODE
43300 ASSIGN_FEED_PER_REF_SOURCE
1360
Description
Oscillation acceleration
Oscillation start direction
Oscillation time for M3 direction
Oscillation time for M4 direction
Feed enable with spindle in setpoint range
Feed enable with stationary spindle
Maximum speeds for tapping
Parameter set definition possible from PLC
Threshold velocity "Axis/spindle stationary"
Threshold value for velocity monitoring.
Description
Revolutional feedrate control in JOG mode
Spindle number converter
Mirror tool length offset
Mirror wear values of tool length compensation
Mirror wear values of machining plane
Invert sign of all wear values
Retain the assignment of tool length components
when changing the machining plane (G17 to G19)
Description
Speed for spindle start via PLC interface
Cutting rate for spindle start via PLC interface
For spindle start via PLC interface
Progr. Spindle speed limiting G25
Progr. Spindle speed limiting G26
Progr. spindle speed limiting G96/G961
Maximum spindle speed
Spindle position for spindle positioning with M19
Spindle positioning approach mode for spindle
positioning with M19
Rotational feedrate for positioning axes/spindles
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions