17.7
Data lists
17.7.1
Machine data
17.7.1.1
NC-specific machine data
Number
Identifier: $MN_
10704
DRYRUN_MASK
10710
PROG_SD_RESET_SAVE_TAB
11410
SUPPRESS_ALARM_MASK
11550
STOP_MODE_MASK
12000
OVR_AX_IS_GRAY_CODE
12010
OVR_FACTOR_AX_SPEED
12020
OVR_FEED_IS_GRAY_CODE
12030
OVR_FACTOR_FEEDRATE
12040
OVR_RAPID_IS_GRAY_CODE
12050
OVR_FACTOR_RAPID_TRA
12060
OVR_SPIND_IS_GRAY_CODE
12070
OVR_FACTOR_SPIND_SPEED
12080
OVR_REFERENCE_IS_PROG_FEED
12082
OVR_REFERENCE_IS_MIN_FEED
12090
OVR_FUNCTION_MASK
12100
OVR_FACTOR_LIMIT_BIN
12200
RUN_OVERRIDE_0
12202
PERMANENT_FEED
12204
PERMANENT_ROT_AX_FEED
17.7.1.2
Channelspecific machine data
Number
Identifier: $MC_
20100
DIAMETER_AX_DEF
20150
GCODE_RESET_VALUES
20172
COMPRESS_VELO_TOL
20200
CHFRND_MAXNUM_DUMMY_BLOCKS
20201
CHFRND_MODE_MASK
20750
ALLOW_GO_IN_G96
21200
LIFTFAST_DIST
21220
MULTFEED_ASSIGN_FASTIN
21230
MULTFEED_STORE_MASK
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Description
Activation of dry run feedrate
Setting data to be updated
Mask for suppressing special alarms
Defines the stop behavior
Axis feedrate override switch, graycoded
Evaluation of the axis feed override switch
Path feed override switch, graycoded
Evaluation of the path feed override switch
Rapid traverse override switch, graycoded
Evaluation of the rapid traverse override switch
Spindle override switch, graycoded
Evaluation of the spindle override switch
Override reference velocity
Defining the reference of the path override
Selection of override specifications
Limit for binarycoded override switch
Traversing with override 0
Fixed feedrates for linear axes
Fixed feedrates for rotary axes
Description
Geometry axes with transverse axis functions
Initial setting of the G groups
Maximum permissible deviation from path feed for
compression
Empty blocks with phase/radii
Behavior for chamfer/rounding
G0 logic for G96, G961
Traversing path for fast retraction from the contour
Assignment of the NCK I/Os for "Multiple feeds in one
block"
Storage behavior, save "Multiple feeds in one block"
V1: Feedrates
17.7 Data lists
1415