Z1: NC/PLC interface signals
19.6 Mode group, channel, program operation, reset response (K1)
DB31, ...
DBX76.4
Path axis
Edge evaluation: no
Signal state 1 or
The axis is involved in the path (path axis).
edge change
Note
0 → 1
In conjunction with SERUPRO in status "Target block found", the signal refers to the status of the
axis in the target block.
Signal state 0 or
The axis is not involved in the path.
edge change
1 → 0
1694
Signal(s) updated: cyclic
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions