Operating Modes; Overview - Siemens SINUMERIK 828D Function Manual

S1: Spindles

16.2 Operating modes

16.2 Operating modes
16.2.1

Overview

Spindle modes
The spindle can have the following modes:
• Control mode
• Oscillation mode
• Positioning mode
• Synchronous mode, synchronous spindle
References:
Function Manual, Extension Functions, Synchronous Spindle (S3)
• Rigid tapping
References:
Programming Manual, Fundamentals; Chapter: Motion commands
Axis mode
The spindle can be switched from spindle mode to axis mode (rotary axis) if the same motor is used for spindle
and axis operation.
1254
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions