Siemens SINUMERIK 828D Function Manual page 1329

SETMS(2) ; SD42800 $SC_SPIND_ASSIGN_TAB[0] = 2 defined internally by NCK.
...
M5 ; Master spindle = address extension=2, the unset spindle number
...
GET(S4) ; Alarm 16105, as logical spindle "4" cannot be switched.
...
RELEASE(S1) ; Channel spindle "1" = physical. Spindle "5" is enabled.
...
M30
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
is output. M3=5
The physical spindle configured with number "3" stops.
S1: Spindles
16.6 Selectable spindles
1329