Siemens SINUMERIK 828D Function Manual page 1448

W1: Tool offset
18.4 Tool cutting edge
Note
The tool type has no significance in the turning tool groups.
Non­listed numbers are also permitted, in particular with grinding tools (400-499).
Tool offset data
Tool offset data (TOA data) is stored in the system variables.
Example Slotting saw tool type (Type 700)
Length compensation
Length 1
Length 2
Length 3
Saw blade compensation
Diameter d
Slot width b
Projection k
Figure 18-3 Geometry of slotting saw (analogous to angle head cutter)
The width of the saw blade is accounted for with tool radius compensation (G40 to G42 as follows:
1448
Geometry Wear
$TC_DP3 $TC_DP12
$TC_DP4 $TC_DP13
$TC_DP5 $TC_DP14
$TC_DP6 $TC_DP15
$TC_DP7 $TC_DP16
$TC_DP8 $TC_DP17
Base Einheit
$TC_DP21 mm
$TC_DP22 mm
$TC_DP23 mm
mm
mm
mm
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions