Siemens SINUMERIK 828D Function Manual page 1177

DB390x NCK → PLC status signals
DBX3000.7 Positioning axes active
DBX3000.6 Position reached
DBX3000.1 Error
DBB3003 Error number
DBX1.4 Axis/spindle stationary
①
Function activated by user with a positive edge of
②
Positioning axis active
Signals
this case irrelevant.
③
The user stops spindle rotation by resetting
④
The spindle stops and the
⑤
The user then resets
⑥
Stop
Reset of causes
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Position reached
and
Start
Spindle stationary signal is set.
Stop
.
Positioning axis active
to be reset.
Remark
1: for start or stop == 1
1: Function was started without an error
1: Error when traversing, evaluate error number in DBB3003!
Start
.
Position reached
are signaled back,
and setting Stop .
P4: PLC for SINUMERIK 828D
14.6 Function interface
is in
1177