14.5.1.3
Axis and spindle signals
DB3200, 3300, 3700, 3800, 3900
The axis-specific and spindle-specific signals are divided into the following groups:
•
Shared axis/spindle signals
•
Axis signals
•
Spindle signals
•
Drive signals
The signals are transferred cyclically with the following exceptions. The exceptions include axial F value, M and S
value.
An axial F value is entered via the M, S, F distributor if it is transferred to the PLC during the NC machining
process.
The M and S value are also entered via the M, S, F distributor if one or both values requires processing.
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
P4: PLC for SINUMERIK 828D
14.5 Data interface
1149