Siemens SINUMERIK 828D Function Manual page 1114

P4: PLC for SINUMERIK 828D
14.3 Programming
Absolute input
DB3800[AC1].DBX2.1
DB9000[AC0].DBW0
It is not permissible to use constants for indexing:
DB3800[1].DBX2.1
Indirect addressing using V addresses is also not permitted:
V3800[5]0002.1
V3800[AC0]0002.1
Using Cut, Copy and Paste in the data block editor
You can save data (rows, columns and cells) of your data block in the Microsoft clipboard to edit them in a
different program. You can proceed as follows:
• In the context menu (right mouse button) using the commands "Cut"/"Copy" and "Paste".
• Using the keyboard by pressing the shortcut keys <Ctrl+X>/<Ctrl+C> and <Ctrl+V>.
• In the main menu using the "Edit" > "Cut"/"Copy" and "Edit" >"Paste".
Cut: Selected data is copied into the clipboard and is deleted
Copy: Selected data is copied into the clipboard and is not deleted
Paste: If data is in the clipboard, then this data is pasted.
Delete: Selected data block/section is deleted, it is not saved in the clipboard.
You can easily edit your data block in this way, e.g. in Microsoft Excel.
1114
Symbolic input
ToAxis[AC1].ControlEnable
Prototyp1[AC0].MyWord1
ToAxis[5].ControlEnable
V380[5]0002.1
V38[AC0]0002.1
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions