Examples; Toolholder With Orientation Capability; 1Example: Toolholder With Orientation Capability - Siemens SINUMERIK 828D Function Manual

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

Examples

18.15.1.1 Example: Toolholder with orientation capability

The following example uses a toolholder, which is described fully by a rotation about the Y axis. It is therefore

sufficient to enter only one value to define the rotary axis (block N20).

Blocks N50 to N70 describe an end mill with radius 5 mm and length 20 mm.

Block N90 defines a rotation of 37 degrees about the Y axis.

Block N120 activates the tool radius compensation and all settings are made to describe the compensation in the

following blocks with a rotation of 37 degrees about the Y axis.

N20 $TC_CARR8[1] = 1

N50 $TC_DP1[1,1] = 120

N60 $TC_DP3[1,1] = 20

N70 $TC_DP6[1,1] = 5

N110 X0 Y0 Z0 F10000

N120 G42 CUT2DF TCOFR TCARR = 1 T1 D1 X10

Basic Functions

Function Manual, 09/2011, 6FC5397-0BP40-2BA0

; Definition of toolholder 1

; Component of the first rotary axis in

the Y direction

; Definition of tool-compensation memory

; 37-degree rotation about y axis

W1: Tool offset

18.15 Examples

Sinumerik 840d sl