Siemens SINUMERIK 828D Function Manual page 919

Printing a project
The "Print" command under the "Project" menu item can be selected to print a project file. The number of lines
per page is selected under the "Print Setting" menu item. The default setting is 77 lines.
Edit menu item
The following operator actions are examples of those, which can be carried out directly with this menu item:
• Transfer variables
• Delete variables
• change alias names
• Find variables
These actions can also be canceled again under Edit.
Undoing actions
Operator actions relating to the creation of the project file (transfer variables, delete variables, change alias
names) can be undone in this menu.
NC variables menu item
The basic list of all variables is saved in NC Var Selector path Data\Swxy (xy stands for software version no., e.g.
SW 5.3:=xy=53). This list can be selected as an NC variables list. In case of SINUMERIK 840D sl the basic lists
are present in the path Data\Swxy_sl.
Selecting an NC variable list
A list of all the NC variables for an NC version can now be selected and displayed via the "NC Variable List",
"Select" menu item.
Figure 13-25 Window with selected Complete List
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
P3: Basic PLC Program for SINUMERIK 840D sl
13.12 Basic conditions and NC VAR selector
919