Open Status Chart; Working With Several Status Charts - Siemens SINUMERIK 828D Function Manual

Hide thumbs Also See for SINUMERIK 828D:

Table of Contents

P4: PLC for SINUMERIK 828D

14.4 Test and diagnostic functions

Open status chart

Open a status chart to evaluate or change the contents of the chart.

•Click on the button "Status chart" in the navigation bar.

Select the menu command "View" > "Status chart".

Open the directory of the status chart in the operation tree and double click on the symbol of a chart.

If your project includes more than one status chart, using the tab for the status charts at the lower edge of the

window, you can switch over between the individual charts:

If you open a status chart, then the status is still not displayed. You must enable the status

chart so that the status information is updated (see "Enabling the status table [Page 1144]").

Inserting additional additional status charts

To insert additional status charts:

In the operation tree, right click on the "Status chart" folder and in the pop-up menu, select the command

"Insert status chart".

Open the window "Status chart" and call the "Edit" menu of right click and select the command "Insert

contents" > "Table".

Switching between the status charts

After you have inserted a new status chart, a new tab is displayed at the lower edge of the window "Status chart":

If you wish to switch between the status tables:

Click on the tab of the required status chart.

Function Manual, 09/2011, 6FC5397-0BP40-2BA0

Basic Functions

Sinumerik 840d sl