Siemens SINUMERIK 828D Function Manual page 1022

P3: Basic PLC Program for SINUMERIK 840D sl
13.13 Block descriptions
ChrArray :
Convert :
Addr:
DataType :
StringAddr :
Digits :
END VAR
VAR OUTPUT
Error :
END VAR
Description of formal parameters
The table below lists all formal parameters of the BHGDisp function:
Typ
Signal
e
Row I
ChrArray I
Convert I
Addr I
1022
STRING ; //Transfer at least string[32/64]
BOOL; //Activate numerical conversion
POINTER; //Points to the variable being converted
BYTE ; //Data type of the variables
INT; //right-justified string address (1...32/64)
BYTE ; //Number of decimal places (1...3)
BOOL; //Conversion or string error
Type Value range
BYTE 0 ... B#16#F
STRING >= string[32]
[DBName].[VarName]
BOOL
Pointer
Remark
Display-line
"binary" evaluation:
0: no display output
1: Line 1
2: Line 2
3: Line 1 and line 2 to be
changed
4: Line 3
5: Line 1 and line 3 to be
changed
8: Line 4
B#16#F automatic change of
all 4 lines
This string contains the
entire display content
For HT2 the string with 64
characters must be created.
Activation of numerical
conversion
Points to the variable
to be converted
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions