Basic Conditions And Nc Var Selector; Supplementary Conditions; 1Programming And Parameterizing Tools - Siemens SINUMERIK 828D Function Manual

P3: Basic PLC Program for SINUMERIK 840D sl

13.12 Basic conditions and NC VAR selector

13.12 Basic conditions and NC VAR selector
13.12.1

Supplementary conditions

13.12.1.1 Programming and parameterizing tools
Hardware
For the PLCs used in SINUMERIK 840D sl, the following equipment is required for the programming devices or
PCs:
Processor
RAM (MB)
Hard disk,
free capacity (MB)
interfaces
Graphic
Mouse
Operating system
The required version of STEP7 can be installed on equipment meeting the above requirements in cases where
the package has not already been supplied with the programming device.
The following functions are possible with this package:
• Programming
- Editors and compilers for STL (complete scope of the language incl. SFB/SFC calls), LAD, FBD
- Creation and editing of assignment lists (symbol editor)
- Data block editor
- Input and output of blocks ON/OFF line
- Insertion of modifications and additions ON and OFF line
- Transfer of blocks from programming device to the PLC and vice versa
• Configuring
- Parameterizing tool HW Config for CPU and I/O device parameterization
- NetPro parameterizing tool for setting the CPU communication parameters
- Output of system data such as hardware and software version, memory capacity, I/O expansion/
assignment
912
Minimum
Pentium
256
500
MPI, Ethernet incl. cable
Memory card
SVGA (1024*768)
Yes
Windows 2000 /XP Professional, STEP7 version 5.3 SP2 or
higher
Recommendation
Pentium
512 or more
> 500
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions