3Start­up, Installation - Siemens SINUMERIK 828D Function Manual

P3: Basic PLC Program for SINUMERIK 840D sl
13.12 Basic conditions and NC VAR selector
In STEP 7 project
The generated AWL file is transferred to a selectable SIMATIC project (program path) and compiled.
Furthermore, the symbol can also be transferred. This function is available from STEP 7 version 5.1 onwards.
This process takes a longer time owing to the call of STEP 7. Before transferring a new AWL file the file window
of the AWL file is to be closed in the KOP/FUP/AWL Editor.
Option menu item
The following can be selected under the "Option" menu item:
• The current language
• The mode for alias input (always/>24 characters)
Help menu item
The information below can be viewed by selecting the corresponding submenu item:
• The Operator's Guide
• The Description of Variables
The copyright and the version number can also be displayed.
13.12.2.3 Start­up, installation
The Windows application "NC Var selector" is installed using the SETUP program supplied with the package.
924
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions