P4: PLC for SINUMERIK 828D
14.6 Function interface
①
Function activated by user with a positive edge of
②
Positioning axes active
Signal
③
When the position is reached this is signaled (
④
The user then withdraws
⑤
Position reached
The signal
⑥
Positioning is interrupted by setting
cycle.
⑦
The spindle comes to a standstill (
number 115 is output.)
14.6.4.4
Rotate spindle
DB380x
PLC → NCK control signals
DBX3002.0
Incremental
DBX3002.1
Shortest distance
DBX3002.5
Direction of rotation as for M4
DBX3003.0
Absolute, negative direction
DBX3003.1
Absolute, positive direction
DBD3008
Feedrate velocity
DBX3000.5
Start spindle rotation
DBX3001.5
Stop spindle rotation
1176
Start
.
Position reached
Start
.
is then reset.
Spindle reset
. This signal must be present for at least 1 PLC
Spindle stationary
Valid
values
.
Spindle stationary
),
Fault
), the
signal is set. (In this case, fault
Remark
Direction of rotation as for M4:
0
1: Direction of rotation specified by M4
0
0: Direction of rotation specified by M3
0|1
0
0
REAL
Spindle speed
0|1
0|1
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
is set.
Basic Functions