Signals From Axis/Spindle (Db31 - Siemens SINUMERIK 828D Function Manual

Z1: NC/PLC interface signals
19.5 Help function output to PLC (H2)
19.5.3

Signals from axis/spindle (DB31, ...)

DB31, ...
DBD78 F auxiliary function for positioning axis
Edge evaluation: no
The values of the F help functions for positioning axes are stored here. The axis to which each value
applies is determined by the extended address.
DB31, ...
DBD86 M auxiliary function for spindle
Edge evaluation: no
The values for the M3, M4, M5 help functions are sent to the associated interface for the addressed
spindle.
DB31, ...
DBD88 S auxiliary function for spindle
Edge evaluation: no
The values for the S help functions are sent to the associated interface for the addressed spindle.
1666
Signal(s) updated: Job­controlled
Signal(s) updated: Job­controlled
Signal(s) updated: Job­controlled
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions