2Overview Of The Nc/Plc Interface Signals Of Ht 8; 13.13.29 Fc 19, Fc 24, Fc 25, Fc 26 Source Code Description - Siemens SINUMERIK 828D Function Manual

Source: MCP
Feed override
Channel signals
Source: MCP
NC start
NC stop
RESET
Single BLock
13.13.28.2 Overview of the NC/PLC interface signals of HT 8
Operating modes and machine functions
Destination: MCP
AUTOMATIC
MDA
JOG
REPOS
REF
TEACH IN

13.13.29 FC 19, FC 24, FC 25, FC 26 source code description

Task
Machine control panel to application interface (FC 19 M variant, FC 24 slim variant, FC 25 T variant, FC 26 HT8
variant)
Associated blocks
DB 7, no. of MOGs, channels, axes
DB 7, pointer of machine control panel
DB 8, storage for the next cycle
Resources used
None.
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Aim: Prog. axes corresponding to the table in DB 10, DBB 8 - 13
(1. MCP) or DBB 32 - 37 (2. MCP)
DB31, ... .DBB0
Aim: Programmed channel (Parameter: ChanNo)
DB21, ... .DBX7.1
DB21, ... .DBX7.3
DB21, ... .DBX7.7
DB21, ... .DBX0.4
Source: Interface-DB (Parameter BAGNo)
Display for BAG 1
DB11.DBX6.0
DB11.DBX6.1
DB11.DBX6.2
DB11.DBX7.1
DB11.DBX7.2
DB11.DBX7.0
P3: Basic PLC Program for SINUMERIK 840D sl
13.13 Block descriptions
1067