Siemens SINUMERIK 828D Function Manual page 980

P3: Basic PLC Program for SINUMERIK 840D sl
13.13 Block descriptions
Magazine Location
Number Number
_From _From
#M1 #P1
#M1 -1
#M1 -1
#M1 #P1
#M1 #P1
#M1 #P1
#M1 -1
#M1 -1
-1 -1
Note
Before and after this PI service, the MMCSEM PI service must be called up with the
associated parameter WVar1 for this PI service. See PI service MMCSEM for more
information.
Parameterization
Signal Type
PIService ANY
Unit INT
WVar1 INT
WVar2 INT
WVar3 INT
WVar4 INT
WVar5 INT
WVar6 INT
980
Magazine Number
_To
#M2
#M1
-1
-1
#M1
#M2
#M2
#M2
-1
Range of values
PI.TMFPBP
1 ... 10
Location
Number Search area
_To
#P2 Locations starting at magazine #M1, location
#P1 up to magazine #M2, location #P2 are
searched
-1 All locations in magazine #M1 - and no
others - are searched
-1 All locations starting at magazine #M1 are
searched
-1 All locations starting at magazine #M1 and
location #P1 are searched
-1 Locations in magazine #M1 starting at
magazine #M1 and location #P1 in this
magazine are searched
-1 Locations starting at magazine #M1, location
#P1 up to magazine #M2, location #P2 are
searched
#P2 Locations starting at magazine #M1 up to
magazine #M2, location #P2 are searched
-1 Locations starting at magazine #M1 up to
and including magazine #M2 are searched
-1 All magazine locations are searched
Significance
Empty location search
TOA
MagazinNumber_From
Magazine number of magazine, from which
search must begin
LocationNumber_From:
Location number of location in magazine
MagazineNumber_From, at which search must
begin
MagazineNumber_To:
Magazine number of magazine, at which
search must end
LocationNumber_To:
Location number of location in magazine
MagazineNumber_To, at which search must
end
MagazineNumber_Ref:
LocationNumber_Ref:
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions