Tool Parameter 1: Tool Type - Siemens SINUMERIK 828D Function Manual

W1: Tool offset
18.4 Tool cutting edge
18.4.2

Tool parameter 1: Tool type

Description
The tool type (3­digit number) defines the tool in question. The selection of this tool type determines further
components such as geometry, wear and tool base dimensions in advance.
Conditions
The following is applicable to the "Tool type" parameter:
• The tool type must be specified for each tool cutting edge.
• Only the values specified can be used for the tool type.
• Tool type "0" (zero) means that no valid tool has been defined.
1446
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
Basic Functions