Siemens SINUMERIK 828D Function Manual page 763

$MC_RESET_MODE_MASK = 'H4041'
;$MC_RESET_MODE_MASK = 'H41'
;$MC_GCODE_RESET_VALUES[7] = 2
$MC_GCODE_RESET_VALUES[7] = 1
$MN_MM_NUM_GLOBAL_USER_FRAMES = 0
$MN_MM_NUM_GLOBAL_BASE_FRAMES = 3
$MC_MM_NUM_USER_FRAMES = 10
$MC_MM_NUM_BASE_FRAMES = 3
$MN_NCBFRAME_RESET_MASK = 'HFF'
$MC_CHBFRAME_RESET_MASK = 'HFF'
$MN_MIRROR_REF_AX = 0
$MN_MIRROR_TOGGLE = 0
$MN_MM_FRAME_FINE_TRANS = 1
$MC_FRAME_ADD_COMPONENTS = TRUE
; TRACYL with groove side offset is 3rd transformer
$MC_TRAFO_TYPE_3 = 513; TRACYL
$MC_TRAFO_AXES_IN_3[0] = 1
$MC_TRAFO_AXES_IN_3[1] = 5
$MC_TRAFO_AXES_IN_3[2] = 3
$MC_TRAFO_AXES_IN_3[3] = 2
$MC_TRAFO_GEOAX_ASSIGN_TAB_3[0] = 1
$MC_TRAFO_GEOAX_ASSIGN_TAB_3[1] = 5
$MC_TRAFO_GEOAX_ASSIGN_TAB_3[2] = 3
$MC_TRACYL_BASE_TOOL_1[0] = 0.0
$MC_TRACYL_BASE_TOOL_1[1] = 0.0
$MC_TRACYL_BASE_TOOL_1[2] = 0.0
$MC_TRACYL_ROT_AX_OFFSET_1 = 0.0
$MC_TRACYL_ROT_SIGN_IS_PLUS_1 = TRUE
$MC_TRACYL_ROT_AX_FRAME_1 = 1
Basic Functions
Function Manual, 09/2011, 6FC5397-0BP40-2BA0
K2: Axis Types, Coordinate Systems, Frames
; Basic frame is not deselected after
Reset.
; Basic frame is deselected after Reset.
; G54 is the default setting.
; G500 is the default setting.
; from 5 to 100
; from 0 to 8
; No scaling when mirroring.
; Fine offset
; G58, G59 is possible
10.5 Frames
763