N1259A Connection Guide
Output Connection
To Use Options
The following options are available for the N1259A. See
1. N1259A-300 Module selector
2. N1259A-021 Series resistor, 1 M, ± 3000 V max, for drain/collector
3. N1259A-020 High voltage bias-T
4. Socket module and blank board
2-12
For switching measurement resource connected to DUT automatically.
N1259A-022 Series resistor, 100 k, ± 3000 V max, for drain/collector
N1259A-030 Series resistor, 1 k, ± 200 V max, for gate/base
N1259A-035 Universal R-box, for installing your desired resistor
For reducing damage of DUT or preventing SMU from oscillation.
For capacitance or impedance measurements using DC bias of up to ± 3000 V.
For mounting DUT. See the following sections.
•
"N1259A-010 Inline Package Socket module" on page
•
"N1259A-011 Universal Socket Module" on page
•
"N1259A-012 Blank PTFE Board" on page
•
"N1259A-013 Curve Tracer Test Adapter Socket Module" on page
•
"N1259A-014 Gate Charge Socket Module" on page
Figure
2-4.
2-19.
2-20.
2-21.
2-23.
Keysight B1505A Configuration and Connection Guide
2-22.