Keysight Technologies B1505A Configuration Manual page 42

Configuration Guide
N1268A Ultra High Voltage Expander
Model/Option
16493V-001 10 kV Ultra High Voltage Cable, 1.5 m
16493V-002 10 kV Ultra High Voltage Cable, 3 m
N1254A-520 10 kV Ultra High Voltage Open End Cable, 1
m.
Adapters
N1254A-103 Triaxial (m) to BNC (f) adapter
N1254A-517 Adapter, Triax Jack to Triaxial Plug
NOTE
The HPSMU and MPSMU modules cannot be used with the Ultra High Voltage Unit
(UHVU) even when protection adapters are used.
1-34
Description Additional Information
• One UHV cable (Red) and one SHV cable
(Black) are included in the
16493V-001/002.
• These cables are used to connect between
the N1268A UHV Expander and the
N1265A Ultra High Current
Expander/Fixture or a prober.
• Cable length 1.5 m or 3.0 m can be
specified by option 001 or 002.
• One-side 10kV UHV/SHV and the
other-side open end
• These cables are used to connect between
the N1268A UHV output and a device
under test (DUT) placed inside the
N1265A.
• This adapter is needed when a B1512A
HCSMU is used as a voltage controller of
the N1268A. This adapter is used for
Force.
• This adapter is needed when a B1512A
HCSMU is used as a voltage controller of
the N1268A. This adapter is used for
Sense.
Keysight B1505A Configuration and Connection Guide