N1273A-011 Universal Socket Module - Keysight Technologies B1505A Configuration Manual

N1273A-011 Universal Socket Module

This is a blank module, kind of a do-it-yourself kit for supporting variety of packaged
devices. This module can be used by mounting your desired socket or packaged device.
Figure 4-7 Universal Socket Module
To use this module, see the following simple instruction. For the dimensions and screw
holes of a blank board, see
the same manner as the 3-pin Inline Package Socket Module. See
Socket Module" on page
•
Keysight B1505A Configuration and Connection Guide
Dummy board or
Blank board
Universal socket module (blank module)
Figure
4-9.
Requirements:
• Blank board suitable for mounting the socket or packaged device
• Screws for fixing the blank board, supplied with the socket module
• Wire (2 m, 1 ea.) supplied with the socket module
• Lug terminals (14 ea.) supplied with the socket module
• Socket, if you use, and packaged device under test (DUT)
• T-10 and T-15 Torx screwdrivers
• 9 mm wrench
• Caulking tool for lug terminals, 2.0sq
Prepare a socket for your test devices, a blank board, tools for mounting the socket,
screws and nut for socket terminals, and so on separately.
N1272A and N1273A Connection Guide
Lug terminals
4-8. You can use their handmade socket modules with
Output Connection
Wire
"3-pin Inline Package
4-11