Table of Contents
Advertisement
1
Introduction
Power-on options
Some options can be selected only while you turn the multimeter on. These power-on
options are listed in the table below. To select a power-on option, press and hold the
specified key while turning the rotary switch from
options remain selected until the multimeter is turned off.
Table 1-4
Key
34
Power-on options
Description
LCD test. All annunciators are displayed in the LCD. Press any key to exit this mode.
Hold
Simulates the Auto Power-Off (APO) mode. Press any key to turn the multimeter back on and
Hz
resume normal operation.
Save
Enters the Setup mode. For more information, refer to Chapter 4, "Using the Setup Menu".
Shift
Esc
Triggers the exporting of data via the multimeter's optical communication port. The reading on the
primary display is exported, according to the display update rate. Restart the multimeter to resume
MaxMin
normal operation.
to any other position. Power-on
Keysight U1281A/U1282A User's Guide
Advertisement
Table of Contents
