Keysight Technologies B1505A Configuration Manual page 169

Table 5-12 To Connect 16493S-020 Input
B1505A terminals
HCSMU Force
used for
Sense
master
HCSMU Force
used for
Sense
slave
GNDU
Table 5-13 To Connect 16493S-020 Output
1
Output terminals
Low Force Coaxial cable with BNC(m) connector. N1254A-503 can be used.
Sense Coaxial cable with BNC(m) connector. N1254A-503 can be used.
High Force Coaxial cable with HV(plug) connector. N1254A-506 can be used.
Use coaxial cable to minimize affect of inductance.
Sense Triaxial cable with HV(plug) connector. N1254A-505 can be used.
1. This is the DHCSMU channel. The connectors are compatible with the N1258A module selector output
connectors.
2. Non-Kelvin connection is not allowed. GNDU Force and Sense are internally connected to Low Sense.
Keysight B1505A Configuration and Connection Guide
Required cables
16493S HCSMU cable, 3 m or 1.5 m
16493S HCSMU cable, 3 m or 1.5 m
16493L GNDU cable, 3 m or 1.5 m
Required cables/Description
Connection Guide for Wafer Prober and Your Own Test Fixture
To Connect Dual HCSMU Adapter
Input terminals
HCSMU Force
Master
Sense
HCSMU Force
Slave
Sense
GNDU
Connect to
DUT low terminal
2
(ex: source)
DUT high terminal
2
(ex: drain)
5-21