Input Connection - Keysight Technologies B1505A Configuration Manual

N1265A Connection Guide

Input Connection

Input Connection
Prepare the required cables listed in the following tables and connect them between the
B1505A terminals and the relative N1265A terminals.
without HVMCU and UHVU.
HVMCU. And
additional information on the HVMCU, see
page
Voltage Expander" on page
Figure 3-1 N1265A Input Connectors on Rear Panel
SMU 1 ([1], [2]), 2 ([3], [4]), and 3 ([5], [6]) connectors are used for connecting the
MPSMU, HPSMU, or MCSMU. Also SMU 3 ([5], [6]) connectors can be used for
connecting HCSMU or DHCSMU. See
input connector by the type of the connected SMU.
The connectors [1], [3], and [5] are for connecting Force, and the connectors [2], [4], and
[6] are for connecting Sense of the measurement resource connected to the connectors [1],
[3], and [5] respectively.
For connecting HP/MPSMU, the connectors [2], [4], and [6] can be also used to connect
Force of other SMU for non-Kelvin connection.
NOTE For connecting MFCMU, use N1300A-001 CMU cable, N1260A high voltage bias-tee,
and N1254A-518 SHV(plug)-SHV(plug) cable.
3-4
Table 3-3
Table 3-4 shows the additional connections for using UHVU. For the
5-34. For the additional information on the UHVU, see
5-38.
UHV Bias Tee
1
High
High
Low Low
±10 kV Max ±3 kV Max
To avoid electrical shock and instrument damage,
do not remove the cables during operation.
CAUTION
To Use HPSMU/MPSMU
Connect the N1261A-001 protection adapter between the SMU
connectors and HPSMU/MPSMU to prevent damage to the SMU.
Digital I/O
Output Input
Interlock HVSMU
±3 kV Max
Table 3-2
shows the additional connections for using
"To Connect HVSMU Current Expander" on
SMU SMU
2 3
±200 V Max
±200 V Max 1 A 2 A dc 40 A Pulse
Selector Input UHC Input Gate
MCSMU/HCSMU MCSMU/HCSMU
SMU V Control I Control
Force Force Force Force
Sense Sense Sense Sense
±200 V Max ±40 V Max ±40 V Max
Table 3-1 for the SMU signal assigned to the SMU
Keysight B1505A Configuration and Connection Guide
shows the connections
"To Connect Ultra High
LINE
100 - 240 V
50/60 Hz
400 VA Max
GNDU
N10149
KCC-REM-ATi-
1H-ParaINSTR