Table of Contents
Advertisement
PNA Series Microwave Network Analyzer System
N5251A
PNA, Controller, and Test Head Module Interconnections
Mount PNA on Top of Controller
Mount the PNA on top of the N5261/2A controller as shown in
Figure 3-2 on page
3-11. Use the Lock Link kit (U3021-60003) to mechanically connect the two
units. Detailed instructions are contained in the "System Configuration and Operation" section
of the N5261A and N5262A User's and Service Guide (N5262-90001).
Rear Panel Cabling
Figure 3-1 on page 3-10
and 4-port systems. Torque all RF connections to 10 in-lbs (1.13 N.m) to insure proper
connection.
Installation and Service Guide N5251-90001
PNA, Controller, and Test Head Module Interconnections
and
Figure 3-2 on page 3-11
Figure 3-1 on page 3-10
illustrate the rear panel cabling for 2-port
System Installation
and
3-9
Advertisement
Table of Contents
