V-Tail - GRAUPNER S1005 Programming Manual

V-Tail

Adjusting the actuation of a V-tail
Note:
This menu only appears when a V-Tail has
been selected in the basic settings of the
"Model Sel" or "Model type" menu.
In the basic transmitter display, use a finger or the
provided stylus to touch the gear icon labelled "F":
000%
RX TX
RX 00.0V
000:00.0
000 000
mz
000:00.0
0:01:23
Touch
M 1
000 000
NORMAL
Graubele
BATT TIME 00: 01: 23
000
The display switches to the blue function menu. Use a
finger or the provided stylus to touch the "V-Tail" menu
item:
BACK BASE FUNCTION
Q.Link D/R,EXP Wing MIX
Touch
Prog.MIX Aile diff
Butterfly Trainer V-Tail
The elevator and rudder are controlled by two separate-
ly-actuated rudders arranged in a V-shape. The coupling
function for the rudder and elevator control is automati-
cally transferred from the program.
Flight-phase-dependent settings
If you have created Quick Links in the submenu
"Q.Link", page 132, and have assigned an appropriate
name, it appears at the top right in green font such
as "NORMAL". Activate the corresponding switches if
desired to switch between Quick Links:
166
Airplane model function menu - V-Tail
BACK
A
+100% +100% +100% +100%
000%
4.1V
Programming
Touch the corresponding value field with the value to
be changed using a finger or the provided stylus, for
example:
BACK
000
A
+100% +100% +100% +100%
SYSTEM
Touch
THR.CRV
The color of the value field switches from red to blue:
BACK
Flap sett
Telemetry
A
+100% +100% +100% +100%
In the active (blue) value field, press
the current value
NORMAL
S
Graubele
ELEV RUDD
B A B INC
RES
DEC
NORMAL
Graubele S
ELEV RUDD
B A B INC
RES
DEC
NORMAL
Graubele S
ELEV RUDD
B A B INC
RES
DEC
to increase
INC
to reduce it, for example:
DEC
NORMAL
BACK Graubele
ELEV RUDD
A B A B
+075% +100% +100% +100%
Use the same procedure with the values in the other
value fields.
Touch the button to reset a changed value in the
RES
blue (and hence active) field to the default.
Note:
Remember that the mixing travel of the mixers
is cumulative with simultaneous control stick
movement, and one servo or both servos may
mechanically collide. To prevent this, reduce the set
mixing values if necessary.
After you have finished making your settings, touch
the button at the top left of the display to return
BACK
to the menu selection:
BACK BASE FUNCTION
Q.Link D/R,EXP Wing MIX
Prog.MIX
Aile diff Flap MIX
Butterfly Trainer V-Tail
S
INC
RES
DEC
SYSTEM
THR.CRV
Flap sett
Telemetry