Backing Up Projector Settings And Information; Restoring A File; Restoring Factory Default Settings - Christie CP2208 User Manual

4. Select Next.
5. In the Component list, select a component.
6. Select one of these options:
Option
Upgrade Different
Components Only
ICP Only Force Install
Force Upgrade All
Factory Install
7. Select Next.

Backing up projector settings and information

You can back up the current projector settings in case you must restore these settings at a later time.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with service
permissions.
2. Select Menu > Service Setup > File Management.
3. Select Backup.

Restoring a file

You can restore configuration, preference, channel, user, and ICP files.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with service
permissions.
2. Select Menu > Service Setup > File Management.
3. To the right of the File to restore field, select Browse.
4. In the Drive Letter list, select the location of the upgrade file.
5. In the Folder list, browse to the location of the upgrade file.
6. Select the upgrade file and then select Open.
7. In the Select type list, select the type of file to restore.
8. Select Restore.
9. Select Yes.

Restoring factory default settings

You can restore configuration, reference, channel, and user files.
1. On the touch panel controller (TPC), log on to the projector (on page 22) with service
permissions.
2. Select Menu > Service Setup > File Management.
CP2208 User Guide
020-101916-03 Rev. 1 (12-20120)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Backing up, restoring, and upgrading projector files
Description
Upgrades system components that are newer or older than the currently
installed version.
Forces an ICP install regardless of what current version is installed.
Upgrades all components in the upgrade package.
Removes all configurations and upgrades all components.
64