Power Up The Appliance; Log In To The Appliance; Web-Based Interface - Cisco M170 Quick Start Manual

9

Power Up the Appliance

Power up the appliance by pressing the On/Off switch on the
front panel of the Cisco M170. You must wait five minutes for
the system to initialize each time you power up the system.
After the machine powers up, a solid green light indicates that
the appliance is operational.
10

Log In to the Appliance

You can log into the Cisco M170 using one of two interfaces:
the web-based interface or the command line interface.

Web-Based Interface

For web browser access via the Ethernet port (see the
Step 1
"Connect to the Appliance" section on page
Cisco M170 appliance management interface by
entering the following URL in a web browser:
http://192.168.42.42
10
Wait five minutes.
Cisco C170
1
0
9), go to the
1
0
Email
Security
Appliance