Appendix B. Integrated Management Module Error Messages; Imm Events That Automatically Notify Support - IBM X3950 X5 Problem Determination And Service Manual

Types 7145, 7146, 7143, and 7191

Hide thumbs Also See for X3950 X5:

Table of Contents

Appendix B. Integrated management module error messages

This topic provides descriptions of integrated management module error messages.

The IMM messages are displayed in the integrated management module (IMM)

event log. You can view the IMM event log through the IMM Web interface and

through IBM Dynamic System Analysis (as the ASM event log). For more

information about IMM, see the Integrated Management Module User's Guide at

http://www.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5079770

You can configure the Integrated Management Module II (IMM2) to automatically

notify Support (also known as call home) if certain types of errors are encountered.

If you have configured this function, see the table for a list of events that

automatically notify Support.

Table 25. Events that automatically notify Support

80010202-0701ffff

80010202-2801ffff

80010902-0701ffff

80010b03-1500ffff

80070608-2201ffff

806f0021-0b04ffff

806f0021-0b05ffff

806f0021-0b06ffff

806f0021-0b07ffff

806f0021-0b08ffff

Message String

Numeric sensor

[NumericSensorElementName] going low

(lower critical) has asserted.

Numeric sensor

[NumericSensorElementName] going low

(lower critical) has asserted.

Numeric sensor

[NumericSensorElementName] going high

(upper critical) has asserted.

Numeric sensor

[NumericSensorElementName] going high

(upper non-recoverable) has asserted.

Sensor [SensorElementName] has

transitioned to non-recoverable.

Fault in slot