IBM X3950 X5 Problem Determination And Service Manual page 197

5. Grasp the handles and pull the system-board tray out until it stops.
6. Disconnect the information panel assembly cable from the connector on the
system board tray.
7. Press the information panel release tab to the left and hold it while you pull the
right side of the information panel assembly out of the slot on the
system-board tray.
8. Grasp the left side of the information panel assembly and pull the tab out of
the hole on the system-board tray and remove the assembly from the tray.
9. If you are instructed to return the information panel, follow all packaging
instructions, and use any packaging materials for shipping that are supplied to
you.
Stop-tab
Handle
Release latch
Slot
Tab
Information
panel assembly
Chapter 5. Removing and replacing components
Stop-tab
Handle
Release latch
Release
latch
181