IBM X3950 X5 Problem Determination And Service Manual page 229

Obtaining the IP address for the Web interface access
This topic provides instruction for obtaining the IP address for the Web interface
access.
The IMM MAC address tag is tied to the rear of the server. The hostname of the
IMM is "IMM-" plus the last twelve characters of the MAC address. Because the
default setting of the IMM is DHCP, after the IMM Ethernet port is connected to a
management network, it can obtain an IP address from the network and it is
difficult to identify on the network. Viewing the tag is one way to find the IMM
after the server is connected to the network.
To access the Web interface, you need the IP address of the IMM which you can
obtain through the Setup utility. To obtain the IP address, complete the following
steps:
1. Turn on the server.
Note: Approximately 3 minutes after the server is connected to ac power, the
power-control button becomes active.
2. When the prompt <F1> Setup is displayed, press F1. If you have set both a
power-on password and an administrator password, you must type the
administrator password to access the full Setup utility menu.
3. Select System Settings → Integrated Management Module → Network
Configuration.
4. Locate the IP address.
5. Exit from the Setup utility.
Logging on to the IMM web interface
This topic provide steps to log on to the IMM web interface.
About this task
To log on to the IMM web interface, complete the following steps:
Procedure
1. Open a web browser and in the Address or URL field, type the IP address or
host name of the IMM to which you want to connect.
Note: If you are logging on to the IMM for the first time after installation, the
IMM defaults to DHCP. If a DHCP host is not available, the IMM assigns a
static IP address of 192.168.70.125. The MAC address tag provides the default
hostname of the IMM and does not require you to start the server.
2. On the Login page, type the user name and password. If you are using the
IMM for the first time, you can obtain the user name and password from your
system administrator. All login attempts are documented in the system-event
log.
Note: The IMM is set initially with a user name of USERID and password of
PASSW0RD (with a zero, not the letter O). You have read/write access. You
must change this default password the first time you log on.
3. On the Welcome page, type a timeout value (in minutes) in the field that is
provided. The IMM will log you off the web interface if your browser is
inactive for the number of minutes that you entered for the timeout value.
4. Click Continue to start the session. The System Status page provides a quick
view of the server status.
Chapter 6. Configuration information and instructions
213