IBM X3950 X5 Problem Determination And Service Manual page 852

816f010d-040eFFFF • 816f010f-2201FFFF
816f010d-040eFFFF The Drive [StorageVolumeElementName] has been enabled.
Explanation: The previously disabled drive 14 has been enabled.
May also be shown as 816f010d040eFFFF or 0x816f010d040eFFFF
Severity: Info
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010d-040fFFFF The Drive [StorageVolumeElementName] has been enabled.
Explanation: The previously disabled drive 15 has been enabled.
May also be shown as 816f010d040fFFFF or 0x816f010d040fFFFF
Severity: Info
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0167
SNMP Trap ID: 5
Automatically notify Support: No
User response: No action; information only.
816f010f-2201FFFF The System [ComputerSystemElementName] has recovered from a firmware hang.
Explanation: IMM has recovered from a System Firmware Hang.
May also be shown as 816f010f2201FFFF or 0x816f010f2201FFFF
Severity: Info
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0187
SNMP Trap ID: 25
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
836
IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Problem Determination and Service Guide