2. Press in on the release tabs on both ends of the bezel and pull it off of the
Replacing the memory expansion module bezel
About this task
To replace the memory expansion module bezel, complete the following steps:
Procedure
1. Read the safety information that begins with "Safety" on page v and
2. Align the bezel alignment tabs with the chassis and press the bezel onto the
178
IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Problem Determination and Service Guide
chassis.
"Installation guidelines" on page 97.
chassis until it snaps into place.
Alignment
tab
Release
tab
Alignment
tab
Release
tab
Alignment
tab
Release
tab
Bezel
Alignment
tab
Release
tab
Bezel