IBM X3950 X5 Problem Determination And Service Manual page 441

80070608-140fffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: A CPU 3 4 VIO fault has occurred.
May also be shown as 80070608140fffff or 0x80070608140fffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response:
1. Critical: Do Not attempt to power the system on, or AC cycle.
2. 1. If local, pull out the Operator Information Panel, observe and make note of what is being displayed on the
Checkpoint display for support reference.
3. 2. Using the IMM web interface, capture a 'Service Data' file (note:) for support reference.
3. If the Checkpoint display repeatedly blinks F:A then 6:8
4.
- (Trained service technician only) Replace the CPU board
5.
4. If the Checkpoint display repeatedly blinks F:A then 6:9
6.
7. - (Trained service technician only) Replace the CPU board and I/O board assembly
80070608-1410ffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: A system power fault has occurred.
May also be shown as 800706081410ffff or 0x800706081410ffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response: (Trained service technician only) Replace the I/O-board shuttle.
80070608-1411ffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: A system power fault has occurred.
May also be shown as 800706081411ffff or 0x800706081411ffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response: (Trained service technician only) Replace the CPU board.
80070608-140fffff • 80070608-1411ffff
Appendix B. Integrated management module error messages
425