IBM X3950 X5 Problem Determination And Service Manual page 397

4000001e-00000000 • 40000020-00000000
4000001e-00000000 Running the backup Management Controller [arg1] main application.
Explanation: The IMM was unable to run the primary IMM image and has resorted to running the backup image.
May also be shown as 4000001e00000000 or 0x4000001e00000000
Severity: Warning
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: IMM and ID: 0030
SNMP Trap ID: 22
Automatically notify Support: No
User response: Update the IMM firmware. Important: Some cluster solutions require specific code levels or
coordinated code updates. If the device is part of a cluster solution, verify that the latest level of code is supported
for the cluster solution before you update the code.
4000001f-00000000 Please ensure that the Management Controller [arg1] is flashed with the correct firmware. The
Management Controller is unable to match its firmware to the server.
Explanation: The server does not support the installed IMM firmware version.
May also be shown as 4000001f00000000 or 0x4000001f00000000
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: IMM and ID: 0031
SNMP Trap ID: 22
Automatically notify Support: No
User response: Update the IMM firmware to a version that the server supports. Important: Some cluster solutions
require specific code levels or coordinated code updates. If the device is part of a cluster solution, verify that the
latest level of code is supported for the cluster solution before you update the code.
40000020-00000000 Management Controller [arg1] Reset was caused by restoring default values.
Explanation: The default configuration has been restored to the Integrated Management Module.
May also be shown as 4000002000000000 or 0x4000002000000000
Severity: Info
Alert Category: none
Serviceable: No
CIM Information: Prefix: IMM and ID: 0032
SNMP Trap ID:
Automatically notify Support: No
User response: Information only; no action is required.
381
Appendix B. Integrated management module error messages