IBM X3950 X5 Problem Determination And Service Manual page 807

816f000d-040fffff • 816f001b-1f05ffff
816f000d-040fffff The Drive [StorageVolumeElementName] has been removed from unit
[PhysicalPackageElementName].
Explanation: Presence of drive 15 is no longer detected. If hard drive is absent from drive bay a filler is required.
May also be shown as 816f000d040fffff or 0x816f000d040fffff
Severity: Info
Alert Category: System
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0163
SNMP Trap ID: 22
Automatically notify Support: No
User response:
v If drive was intentionally removed, no action required.
v Make sure that the drive properly seated.
v If drive is properly seated, replace the drive.
816f000f-2201ffff The System [ComputerSystemElementName] has detected a POST Error deassertion.
Explanation: IMM has detected that Post Error has deasserted. (ABR Status or Firmware Error).
May also be shown as 816f000f2201ffff or 0x816f000f2201ffff
Severity: Info
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0185
SNMP Trap ID:
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
816f001b-1f05ffff The network port [ManagedElementName] has been disconnected.
Explanation: Memory expansion module fan cable was disconnected.
May also be shown as 816f001b1f05ffff or 0x816f001b1f05ffff
Severity: Warning
Alert Category: Warning
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0263
SNMP Trap ID: 60
Automatically notify Support: No
User response: no action; information only
791
Appendix B. Integrated management module error messages