IBM X3950 X5 Problem Determination And Service Manual page 427

80070603-0701ffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: A sensor (Pwr Rail A/B/C/D/E/F/G/H Fault) has transitioned to non-recoverable state.
May also be shown as 800706030701ffff or 0x800706030701ffff
Severity: Error
Alert Category: Critical
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response:
1. Critical: Do Not attempt to power the system on, or AC cycle.
2. 1. If local, pull out the Operator Information Panel, observe and make note of what is being displayed on the
Checkpoint display for support reference.
3. 2. Using the IMM web interface, capture a 'Service Data' file (note:) for support reference.
3. If the Checkpoint display repeatedly blinks F:A then 6:7
4.
-(Trained service technician only) Replace the I/O board assembly
5.
4. If the Checkpoint display repeatedly blinks F:A then 6:8
6.
7. - (Trained service technician only) Replace the CPU board
8. 5. If the Checkpoint display repeatedly blinks F:A then 6:9
9. - (Trained service technician only) Replace the CPU board and I/O board assembly
80070608-0a01ffff Sensor [SensorElementName] has transitioned to non-recoverable.
Explanation: Memory expansion module power supply 1 error detected.
May also be shown as 800706080a01ffff or 0x800706080a01ffff
Severity: Error
Alert Category: Critical
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0530
SNMP Trap ID: 4
Automatically notify Support: No
User response:
1. Check memory expansion module LEDs.
2. Check memory expansion module power supply 1 LEDs.
3. Replace the memory expansion module power supply 1.
80070603-0701ffff • 80070608-0a01ffff
Appendix B. Integrated management module error messages
411