IBM X3950 X5 Problem Determination And Service Manual page 376

166-911-001 • 166-912-001
166-911-001 IMM I2C Test Failed
Explanation: IMM Indicates failure in the Voltage Regulator bus (Memory Drawer BUS 2).
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at a time and try the test after each action:
1. Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the latest level.
3. Reseat the Memory Drawer.
4. Reseat PCIe/power card.
5. Reseat the CPU card.
6. Run the test again.
7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the
next corrective action.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
166-912-001 IMM I2C Test Failed
Explanation: IMM Indicates failure in the Clock bus (Memory Drawer BUS 3).
Severity: Error
Serviceable: Yes
Recoverable: No
Automatically notify Support: No
User response: Perform the actions mentioned one at a time and try the test after each action:
1. Turn off the system and disconnect it from power. Wait for 45 seconds. Reconnect it to power.
2. Make sure that DSA and BMC/IMM are at the latest level.
3. Reseat the Memory Drawer.
4. Reseat PCIe/power card.
5. Reseat the CPU card.
6. Run the test again.
7. If failure remains, refer to "Troubleshooting by symptom" in the system "Installation and Service Guide" for the
next corrective action.
Related Links:
IBM Support Website
v
Latest level of DSA
v
Latest level of BMC/IMM
v
360
IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Problem Determination and Service Guide