Removing The Front Bezel - IBM X3950 X5 Problem Determination And Service Manual

Results
Replacing the top-cover bracket
This topic provides instructions for how to replace the top-cover bracket.
About this task
To replace the top-cover bracket, complete the following steps:
Procedure
1. Make sure that all internal cables are correctly routed.
2. Align the top-cover bracket on top of the server so that the metal tabs line up
3. Slide the blue latches on the top cover bracket toward the outside of the server

Removing the front bezel

This topic provides instructions for how to remove the front bezel.
108
IBM System x3850 X5 and x3950 X5 Types 7145, 7146, 7143, and 7191: Problem Determination and Service Guide
Latch
correctly on the chassis, and then rotate it into place.
to lock it in place.
Latch