IBM X3950 X5 Problem Determination And Service Manual page 537

806f0207-0304ffff [ProcessorElementName] has Failed with FRB1/BIST condition.
Explanation: IMM has detected a Miroprocessor 4 Failed - FRB1/BIST condition.
May also be shown as 806f02070304ffff or 0x806f02070304ffff
Severity: Error
Alert Category: Critical
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
1. Check for a server firmware update.
2. Important: Some cluster solutions require specific code levels or coordinated code updates. If the device is part of
a cluster solution, verify that the latest level of code is supported for the cluster solution before you update the
code.
3. Make sure that the installed microprocessors are compatible with each other.
4. (Trained service technician only)
Reseat microprocessor 4.
5.
6. (Trained service technician only)
Replace microprocessor 4.
7.
806f0208-0701ffff Failure predicted on [PowerSupplyElementName].
Explanation: AC power lost to a power supply.
May also be shown as 806f02080701ffff or 0x806f02080701ffff
Severity: Warning
Alert Category: Warning
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0088
SNMP Trap ID: 164
Automatically notify Support: No
User response: Make sure there is enough power supplied to the server.
806f020d-0400ffff Failure Predicted on drive [StorageVolumeElementName] for array
[ComputerSystemElementName].
Explanation: Failure predicted (PFA) on the hard drive 0.
May also be shown as 806f020d0400ffff or 0x806f020d0400ffff
Severity: Warning
Alert Category: Warning
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0168
SNMP Trap ID: 27
Automatically notify Support: Yes
User response: Replace the hard disk drive at the next maintenance period.
806f0207-0304ffff • 806f020d-0400ffff
Appendix B. Integrated management module error messages
521