IBM X3950 X5 Problem Determination And Service Manual page 535

806f0125-1801ffff [ManagedElementName] detected as absent.
Explanation: IMM has detected the memory drawer is absent.
May also be shown as 806f01251801ffff or 0x806f01251801ffff
Severity: Info
Alert Category: System
Serviceable: No
CIM Information: Prefix: PLAT and ID: 0392
SNMP Trap ID:
Automatically notify Support: No
User response:
1. Check if the memory drawer is connected or not.
2. If it's connected, replace the connection cable.
3. Replace the memory drawer.
806f0207-0301ffff [ProcessorElementName] has Failed with FRB1/BIST condition.
Explanation: IMM has detected a Miroprocessor 1 Failed - FRB1/BIST condition.
May also be shown as 806f02070301ffff or 0x806f02070301ffff
Severity: Error
Alert Category: Critical
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0044
SNMP Trap ID: 40
Automatically notify Support: Yes
User response:
1. Check for a server firmware update.
2. Important: Some cluster solutions require specific code levels or coordinated code updates. If the device is part of
a cluster solution, verify that the latest level of code is supported for the cluster solution before you update the
code.
3. Make sure that the installed microprocessors are compatible with each other.
4. (Trained service technician only)
5. Reseat microprocessor 1.
6. (Trained service technician only)
7. Replace microprocessor 1.
806f0125-1801ffff • 806f0207-0301ffff
Appendix B. Integrated management module error messages
519