Default Output Rules For Security Logs; Default Output Rules For Hidden Logs; Default Output Rules For Trace Logs; Default Output Rules For Custom Logs - H3C SR6600-X Configuration Manual

Table 16 Default output rule for diagnostic logs
Destination
Diagnostic log file

Default output rules for security logs

Security logs can only be output to the security log file, and cannot be filtered by source modules and
severity levels.
Table 17 Default output rule for security logs
Destination
Security log file

Default output rules for hidden logs

Hidden logs can be output to the log host, the log buffer, and the log file.
output rules for hidden logs.
Table 18 Default output rules for hidden logs
Destination
Log host
Log buffer
Log file

Default output rules for trace logs

Trace logs can only be output to the trace log file, and cannot be filtered by source modules and severity
levels. Table 19
Table 19 Default output rules for trace logs
Destination
Trace log file

Default output rules for custom logs

Custom logs can only be output to a log host, and cannot be filtered by source modules and severity
levels. Table 20
Table 20 Default output rules for custom logs
Destination
Log host
Log source modules
All supported modules
Table 17 shows the default output rule for security logs.
Log source modules
All supported modules
Log source modules
All supported modules
All supported modules
All supported modules
shows the default output rules for trace logs.
Log source modules
All supported modules
shows the default output rules for custom logs.
Log source modules
Specific operations
Output switch
Enabled
Output switch
Disabled
Output switch
Enabled
Enabled
Enabled
Output switch
Enabled
Output switch
Enabled
243
Severity
Debug
Severity
Debug
Table 18 shows the default
Severity
Informational
Informational
Informational
Severity
Debugging
Severity
Debugging