Displaying The Snmp Settings - H3C SR6600-X Configuration Manual

Step
3. (Optional.)
Configure a source
address for
notifications.
4. (Optional.) Enable
extended
linkUp/linkDown
notifications.
5. (Optional.)
Configure the
notification queue
size.
6. (Optional.)
Configure the
notification lifetime.

Displaying the SNMP settings

Execute display commands in any view.
Task
Display SNMP agent system information, including
the contact, physical location, and SNMP version.
Display SNMP agent statistics.
Display the local engine ID.
Display SNMP group information.
Display remote engine IDs.
Display basic information about the notification
queue.
Display the modules that can generate notifications
and their notification status (enable or disable).
Display SNMPv3 user information.
Display SNMPv1 or SNMPv2c community
information. (This command is supported only for high
encryption in non-FIPS mode.)
Display MIB view information.
Display SNMP MIB node information.
Display an SNMP context.
Command
snmp-agent { inform | trap } source interface-type
{ interface-number | interface-number.subnumber }
snmp-agent trap if-mib link extended
snmp-agent trap queue-size size
snmp-agent trap life seconds
166
Command
display snmp-agent sys-info [ contact | location |
version ] *
display snmp-agent statistics
display snmp-agent local-engineid
display snmp-agent group [ group-name ]
display snmp-agent remote [ ip-address
[ vpn-instance vpn-instance-name ] | ipv6
ipv6-address [ vpn-instance vpn-instance-name ] ]
display snmp-agent trap queue
display snmp-agent trap-list
display snmp-agent usm-user [ engineid engineid |
username user-name | group group-name ] *
display snmp-agent community [ read | write ]
display snmp-agent mib-view [ exclude | include |
viewname view-name ]
display snmp-agent mib-node [ details | index-node
| trap-node | verbose ]
display snmp-agent context [ context-name ]
Remarks
By default, SNMP uses the
IP address of the outgoing
routed interface as the
source IP address.
By default, the SNMP
agent sends standard
linkup/linkDown
notifications.
By default, the notification
queue can hold 100
notification messages.
The default notification
lifetime is 120 seconds.