H3C SR6600-X Configuration Manual page 274

Hide thumbs Also See for SR6600-X:
Table of Contents

Advertisement

Field
Description
Reasons why a flow log was generated:
Operator
IPVersion
IP packet version.
TosIPv4
ToS field of the IPv4 packet.
SourceIP
Source IP address before NAT.
SrcNatIP
Source IP address after NAT.
DestIP
Destination IP address before NAT.
DestNatIP
Destination IP address after NAT.
SrcPort
Source TCP/UDP port number before NAT.
SrcNatPort
Source TCP/UDP port number after NAT.
DestPort
Destination TCP/UDP port number before NAT.
DestNatPort
Destination TCP/UDP port number after NAT.
StartTime
Start time of the flow, in seconds.
End time of the flow, in seconds.
EndTime
This field is 0 when the Operator field is 6 (regular connectivity check record for the
active flow).
InTotalPkg
Number of packets received for the session.
InTotalByte
Number of bytes received for the session.
OutTotalPkg
Number of packets sent for the session.
OutTotalByte
Number of bytes sent for the session.
InVPNID
ID of the source VPN instance.
OutVPNID
ID of the destination VPN instance.
Reserved1
Reserved2
Reserved for future use.
Reserved3
0—Reserved.
1—Flow was ended normally.
2—Flow was aged out because of aging timer expiration.
3—Flow was aged out because of configuration change.
4—Flow was aged out because of insufficient resources.
5—Reserved.
6—Regular connectivity check record for the active flow.
7—Flow was deleted because a new flow was created when the flow table was full.
8—Flow was created.
FE—Other reasons.
10-FE-1—Reserved for future use.
260

Advertisement

Table of Contents
loading

This manual is also suitable for:

R6600

Table of Contents