Configuring The Ipv6 Netstream Aggregation Data Export - H3C SR6600-X Configuration Manual

Hide thumbs Also See for SR6600-X:
Table of Contents

Advertisement

Step
2.
Specify a destination
host for IPv6 NetStream
traditional data export.
3.
(Optional.) Specify the
source interface for IPv6
NetStream data packets
sent to the NetStream
servers.
4.
(Optional.) Limit the IPv6
NetStream data export
rate.

Configuring the IPv6 NetStream aggregation data export

The IPv6 NetStream aggregation is implemented by software.
Configurations in IPv6 NetStream aggregation mode view apply only to the IPv6 NetStream
aggregation data export. Configurations in system view apply to the IPv6 NetStream traditional data
export. When no configuration in IPv6 NetStream aggregation mode view is provided, the
configurations in system view apply to the IPv6 NetStream aggregation data export.
To configure the IPv6 NetStream aggregation data export:
Step
1.
Enter system view.
2.
Enter IPv6 NetStream
aggregation mode view.
3.
Specify a destination
host for IPv6 NetStream
aggregation data
export.
Command
ipv6 netstream export host { [ ip-address ]
| [ ipv6-address ] } udp-port [ vpn-instance
vpn-instance-name ]
ipv6 netstream export source interface
interface-type interface-number
ipv6 netstream export rate rate
Command
system-view
ipv6 netstream aggregation { as |
bgp-nexthop | destination-prefix | prefix
| protocol-port | source-prefix }
ipv6 netstream export host { [ ip-address ]
| [ ipv6-address ] } udp-port [ vpn-instance
vpn-instance-name ]
234
Remarks
By default, no destination host is
specified.
By default, no source interface is
specified for IPv6 NetStream
data packets. The packets take
the primary IPv6 address of the
output interface as the source
IPv6 address.
H3C recommends that you
connect the management
Ethernet interface to a
NetStream server, and configure
the interface as the source
interface.
By default, the data export rate
is not limited.
Remarks
N/A
N/A
By default, no destination host is
specified.
If you expect only IPv6
NetStream aggregation data,
specify the destination host only
in the related IPv6 NetStream
aggregation mode view.

Advertisement

Table of Contents
loading

This manual is also suitable for:

R6600

Table of Contents